This Part has options, please click the button below to order.
421-SA-28R Dual Ram Power Steering for Dual Alpha Applications 9" Narrow Mount
The IMCO Standard Dual Ram Power Steering System is intended for Dual Alpha powered recreational performance sport boats. The system consists of
through-transom hydraulic port bracketry with all necessary hose, fittings,
fasteners, aluminum drive end caps and stainless braided line Once installed,
boat drivers will experience significantly more precise steering control,
especially at higher speeds. This kit has a narrower mount for applications with limited horizontal clearance.
Do it yourself. Install a dual ram steering system in approximately six hours or less.
Note: These kits contain non-assembled rubber hoses and brass fittings. See
steering component section for stainless steel braided line options.
Requires Installation Kit:
421-HK-11, Brazilian manifold style, 1994 and later.
421-HK-9, Saginaw fitting style, 1994 and earlier.
For parts list, and to buy replacement parts click here
|
|
This Part has options, please click the button below to order.
421-SA-25 Dual Ram Power Steering for Alpha Applications 10.5" Standard Mount
The IMCO Dual Single Ram Power Steering System is intended for Alpha powered recreational performance sport boats. The system consists of
through-transom hydraulic port bracketry with all necessary hose, fittings,
fasteners, aluminum drive end caps and stainless braided line Once installed,
boat drivers will experience significantly more precise steering control,
especially at higher speeds.
Do it yourself. Install a dual ram steering system in approximately five hours or less.
Note: These kits contain non-assembled rubber hoses and brass fittings. See
steering component section for stainless steel braided line options.
Requires Installation Kit:
421-HK-11, Brazilian manifold style, 1994 and later.
421-HK-9, Saginaw fitting style, 1994 and earlier.
For parts list, and to buy replacement parts click here
|
|
This Part has options, please click the button below to order.
421-SA-26 Standard Single Ram Power Steering for Alpha Applications 10.5" Standard Mount
The IMCO Standard Single Ram Power Steering System is intended for Alpha powered recreational performance sport boats. The system consists of
through-transom hydraulic port bracketry with all necessary hose, fittings,
fasteners, aluminum drive end caps and stainless braided line Once installed,
boat drivers will experience significantly more precise steering control,
especially at higher speeds.
Do it yourself. Install a single ram steering system in approximately four
hours or less.
Note: These kits contain non-assembled rubber hoses and brass fittings. See
steering component section for stainless steel braided line options.
Requires Installation Kit:
421-HK-11, Brazilian manifold style, 1994 and later.
421-HK-9, Saginaw fitting style, 1994 and earlier.
For parts list, and to buy replacement parts click here
|
|
137-9266 Single Cylinder Hose Kit
- Two 22" Inside Hoses
- Two 4NPTx-6 JIC 90 Degree Fittings
|
|
421-SA-93 Dual External Hydraulic Steering For 2 Mercury 300 X Drives
IMCO's external hydraulic steering for the Mercury 300X has been designed, engineered and tested to eliminate side-to-side drive unit "play", a major contributor to high speed chine walking IMCO's power steering system is ultra heavy-duty throughout. The IMCO steering systems are easily installed and priced more affordably than other less efficient alternatives.
Note: These kits contain non-assembled rubber hoses and brass fittings See steering component section for stainless steel braided line options.
For parts list, and to buy replacement parts click here
|
|
This Part has options, please click the button below to order.
421-SA-72 Standard Single Ram Power Steering for Mercury 300R
The IMCO Standard Single Ram Power Steering System is intended for Mercury 300 R powered recreational performance sport boats. Once installed,
boat drivers will experience significantly more precise steering control,
especially at higher speeds.
Do it yourself. Install a single ram steering system in approximately four
hours or less.
Note: These kits contain non-assembled rubber hoses and brass fittings. See
steering component section for stainless steel braided line options.
|
|
This Part has options, please click the button below to order.
421-SA-73 Standard Single Ram Power Steering for Mercury 300 X
The IMCO Standard Single Ram Power Steering System is intended for Mercury 300 X powered recreational performance sport boats. Once installed,
boat drivers will experience significantly more precise steering control,
especially at higher speeds.
Do it yourself. Install a single ram steering system in approximately four
hours or less.
Note: These kits contain non-assembled rubber hoses and brass fittings. See
steering component section for stainless steel braided line options.
For parts list, and to buy replacement parts click here
|
|
This Part has options, please click the button below to order.
421-SA-91 Standard Dual Ram Power Steering for Dual Mercury 2.5 EFI
The IMCO Standard Dual Ram Power Steering System is intended for Dual Mercury 2.5 EFI powered recreational performance sport boats. Once installed,
boat drivers will experience significantly more precise steering control,
especially at higher speeds.
Do it yourself. Install a single ram steering system in approximately four
hours or less.
Note: These kits contain non-assembled rubber hoses and brass fittings. See
steering component section for stainless steel braided line options.
For parts list, and to buy replacement parts click here
|
|
This Part has options, please click the button below to order.
421-SA-75 Standard Dual Ram Power Steering for Mercury 300R, No Tie Bar, Outside Only
The IMCO Standard Single Ram Power Steering System is intended for Mercury 300 R powered recreational performance sport boats and used primarily in moderate water conditions. Once installed,
boat drivers will experience significantly more precise steering control,
especially at higher speeds.
Do it yourself. Install a single ram steering system in approximately four
hours or less.
Note: These kits contain non-assembled rubber hoses and brass fittings. See
steering component section for stainless steel braided line options.
|
|
This Part has options, please click the button below to order.
421-SA-71 Standard Single Ram Power Steering for Mercury 2.5 EFI
The IMCO Standard Single Ram Power Steering System is intended for Mercury 2.5 EFI powered recreational performance sport boats. Once installed,
boat drivers will experience significantly more precise steering control,
especially at higher speeds. Kit includes Tilt pin, Steering Ram, Wing Plate Outside hoses and thru hulls.
Do it yourself. Install a single ram steering system in approximately four
hours or less.
For parts list, and to buy replacement parts click here
|
|
This Part has options, please click the button below to order.
421-SA-1 Standard Single Ram Power Steering
The IMCO Standard Single Ram Power Steering System is intended for Bravo
powered recreational performance sport boats capable of speeds in the 60 to 70
mph range and used primarily in moderate water conditions. The system consists of
through-transom hydraulic port bracketry with all necessary hose, fittings,
fasteners, aluminum drive end caps and stainless braided line Once installed,
boat drivers will experience significantly more precise steering control,
especially at higher speeds.
Do it yourself. Install a single ram steering system in approximately four
hours or less.
Note: These kits contain non-assembled rubber hoses and brass fittings. See
steering component section for stainless steel braided line options.
Requires Installation Kit:
421-HK-11, Brazilian manifold style, 1994 and later.
421-HK-9, Saginaw fitting style, 1994 and earlier.
For parts list, and to buy replacement parts click here
|
|
This Part has options, please click the button below to order.
|
|
This Part has options, please click the button below to order.
421-HK-9 Hose Kit Saginaw Control Valve, Short Hoses
"FOR BOATS EXCEEDING 70 MPH A FULL HYDRAULIC HOSE KIT IS RECOMMENDED" SAGINAW CONTROL VALVE APPLIES TO ALL HIGH PERFORMANCE ENGINE PACKAGES 1999 AND EARLIER AND TO ALL ENGINE PACKAGES 1994 AND EARLIER
For parts list, and to buy replacement parts click here
|
|
This Part has options, please click the button below to order.
421-SA-82 Standard Single Ram Power Steering
The IMCO Standard Single Ram Power Steering System is intended for Evinrude E-Tec 250 HO Motor
powered recreational performance sport boats. Once installed,
boat drivers will experience significantly more precise steering control,
especially at higher speeds.
Do it yourself. Install a single ram steering system in approximately four
hours or less.
Note: These kits contain non-assembled rubber hoses and brass fittings. See
steering component section for stainless steel braided line options.
For parts list, and to buy replacement parts click here
|
|
This Part has options, please click the button below to order.
421-SA-74 Standard Single Ram Power Steering
The IMCO Standard Single Ram Power Steering System is intended for Mercury XS powered recreational performance sport boats. Once installed,
boat drivers will experience significantly more precise steering control,
especially at higher speeds.
Do it yourself. Install a single ram steering system in approximately four
hours or less.
For parts list, and to buy replacement parts click here
|
|
137-9183 Single Cylinder Zeiger Fitting Kits
Includes:
- Fitting -6 JIC Male/Female 90 Degree SS
- Fitting -6 JIC X 1/4" NPT 90 Degree
- Tee -6 JIC To -6 JIC Male SS
|
|
This Part has options, please click the button below to order.
421-SA-4-R Dual External Hydraulic Steering For 2 Bravo One Stern Drives
IMCO's external hydraulic steering for the MerCruiser Bravo One has been designed, engineered and tested to eliminate side-to-side drive unit "play", a major contributor to high speed chine walking IMCO's power steering system is ultra heavy-duty throughout. The IMCO steering systems are easily installed and priced more affordably than other less efficient alternatives.
Note: These kits contain non-assembled rubber hoses and brass fittings See steering component section for stainless steel braided line options.
Kit includes Tie bar up to 18" at no extra cost. Tie Bars longer than 18" will have additional price per inch. Please type the exact length of the tie bar you need (example: 34.5") and then select the price option from the drop drown (from previous example, choose 35" for a 34.5" tie bar)
Requires Installation Kit:
421-HK-11, Brazilian manifold style, 1994 and later.
421-HK-9, Saginaw fitting style, 1994 and earlier.
For parts list, and to buy replacement parts click here
|
|
421-SA-12 Dual External Hydraulic Steering For Bravo One Stern Drives
IMCO's external hydraulic steering for the MerCruiser Bravo One has been designed, engineered and tested to eliminate side-to-side drive unit "play", a major contributor to high speed chine walking IMCO's power steering system is ultra heavy-duty throughout. The IMCO steering systems are easily installed and priced more affordably than other less efficient alternatives. Includes an extension box kit.
Note: These kits contain non-assembled rubber hoses and brass fittings See steering component section for stainless steel braided line options.
For parts list, and to buy replacement parts click here
|
|
This Part has options, please click the button below to order.
421-SA-30-R Standard Single Ram Power Steering
The IMCO Standard Single Ram Power Steering System is intended for Bravo
powered recreational performance sport boats capable of speeds in the 60 to 70
mph range and used primarily in moderate water conditions. Once installed,
boat drivers will experience significantly more precise steering control,
especially at higher speeds.
Do it yourself. Install a single ram steering system in approximately four
hours or less.
Note: These kits contain non-assembled rubber hoses and brass fittings. See
steering component section for stainless steel braided line options.
Requires Installation Kit:
421-HK-11, Brazilian manifold style, 1994 and later.
421-HK-9, Saginaw fitting style, 1994 and earlier.
For parts list, and to buy replacement parts click here
|
|
This Part has options, please click the button below to order.
421-SA-30 Standard Single Ram Power Steering
The IMCO Standard Single Ram Power Steering System is intended for Bravo
powered recreational performance sport boats capable of speeds in the 60 to 70
mph range and used primarily in moderate water conditions. Once installed,
boat drivers will experience significantly more precise steering control,
especially at higher speeds.
Do it yourself. Install a single ram steering system in approximately four
hours or less.
Note: These kits contain non-assembled rubber hoses and brass fittings. See
steering component section for stainless steel braided line options.
Requires Installation Kit:
421-HK-11, Brazilian manifold style, 1994 and later.
421-HK-9, Saginaw fitting style, 1994 and earlier.
For parts list, and to buy replacement parts click here
|
|
