137-8201
- Replaces Trim Pump Assembly for Bravo/Alpha Drives
- Uses Early Style Bracket
- Bracket is made from Stainless Steel
- 12v, 3 Wire Trim Pump #137-8235
- -4 Inverted Flare Fittings
- Includes Solenoid and Wire Harness
- High Pressure Pump, 2600 PSI Up, 600 PSI Down
- Replaces Mercury Pump OEM #'s 14336A20, 14336A25, 14336A31, 865380A03, 865380A13
- Replaces Mercury Bracket OEM #'s 42419A1, 862548A1
- Replaces Mercury Assembly OEM #'s 14336A9, 14336A15, 14336A17, 14336A22, 14336A28, 865380A02, 865380A05, 865380A15, 865380A25
|
|
137-8273 This is a replacement steel reservoir can. This is used on our 137-8232 & 137-8233 trim pumps. It is 3.70" diameter at the top. 3.60" diameter at the bottom. 4.87" tall.
|
|
137-8212
- Replaces Trim Pump Assembly for Bravo/Alpha Drives
- Uses Late Style Bracket
- Bracket is made from Stainless Steel
- 12v, 3 Wire Trim Pump #137-8235
- -4 Inverted Flare Fittings
- Includes Solenoid and Wire Harness
- High Pressure Pump, 2600 PSI Up, 600 PSI Down
- Replaces Mercury Pump OEM #'s 14336A20, 14336A25, 14336A31, 865380A03, 865380A13
- Replaces Mercury Bracket OEM # 862548A1
- Replaces Mercury Assembly OEM #'s 14336A9, 14336A15, 14336A17, 14336A22, 14336A28, 865380A02, 865380A05, 865380A15, 865380A25
|
|
137-8206
- Replaces Trim Pump Assembly for Bravo/Alpha Drives
- Bulkhead Mount Billet Aluminum Bracket
- Bracket is anodized black for protection
- 12v, 3 Wire Trim Pump
- -4 Inverted Flare Fittings
- Includes Solenoid and Wire Harness
- All stainless steel hardware is also included.
- Made in USA Parker Hannifin built pumps manufactured to factory specs
- Thread size is -4 O-Ring to 7/16-20 thread, shown fittings not included.
- Uses 10w30 oil
|
|
137-8208
- For Mercury #6 / Speedmaster Drive Applications
- High Pressure Race Application Pump
- Includes Heavy Duty Black Billet Aluminum Bulkhead Trim Pump Bracket
- Pump comes complete with Solenoids,
- All stainless steel hardware is included
- Made in USA Parker Hannifin built pumps manufactured to factory specs
- Uses 10w30 oil
|
|
137-8203
- For use with Mercruiser Speedmaster Drives
- High Pressure Race Application Pump
- 12v 3-Wire Trim Pump
- Bulkhead mount high performance trim pump.
- Pump comes complete with solenoids.
- Bracket is made of billet aluminum and are black anodized for protection.
- All stainless steel hardware is also included.
- Made in USA Parker Hannifin built pumps manufactured to factory specs
- Uses 10w30 oil
|
|
137-8233
- Complete Replacement Trim Pump
- 12V 3-Wire Pump Used On Mercruiser Speedmaster Drives
- High Pressure For Race Application
- No Bracket Included
- Made in USA, Parker Hannifin built pumps manufactured to factory specs
- Uses 10w30 oil
- Replaces OEM Mercruiser # 8M0051203
|
|
137-8235
- Complete Replacement Trim Pump
- 12V 3-Wire Pump For Late Model Mercruiser Stern Drives
- No Bracket Included
- -4 Inverted Flare Fittings
|
|
137-8276 12 Volt 3-Wire Trim Pump Motor
Fits:
- Merc: 17649T, 17649A1, 87828, 891736T
- API: PTS01NM-2
- Mallory: 9-18207
- Sierra: 18-6772
We carry a selection of new trim pumps for your outdrives, trim tabs and hatch rams. Floor mount trim pump for the stock stern drive package and high performance mount for the offshore racer. We also stock new replacement reservoir tanks and electric trim motors for replacement. These are what the factory uses, just not the factory price.
|
|
137-8277 24 Volt 3-Wire Trim Pump Motor
We carry a selection of new trim pumps for your outdrives, trim tabs and hatch rams. Floor mount trim pump for the stock stern drive package and high performance mount for the offshore racer. We also stock new replacement reservoir tanks and electric trim motors for replacement. These are what the factory uses, just not the factory price.
|
|
137-8081
- Main terminals run perpendicular to mounting bracket
- Replaces Mercruiser OEM # 89-96158T
- Includes a cap for main terminals
- Length is 2-1/2", Width is 2-1/4" and Height is 2-3/8"
- 12v Relay Solenoid, Isolated base
- Includes nuts for terminals
- Does not include mounting hardware
- Electrical spec: 7 AMPS WHILE HOLDING 30 AMPS FOR SPLIT SECOND TO ENERGIZE
TAKE NOTE of which way the main terminals face on the Trim Relay Solenoid you are replacing. This model goes perpendicular of the mounting holes.
|
|
