This Part has options, please click the button below to order.
421-PFS-85SAK Powerflow Small Block System with Stainless Silent Choice Risers
This popular system allows the use of a
switchable exhaust diverter. These risers are stainless
steel and custom designed to ease installation. They
use a standard 4" diverter connection.
Powerflow manifolds are manufactured using the
finest materials and most advanced techniques available.
The high quality aluminum manifold castings feature
water jackets that surround each exhaust passage, including
the port, to eliminate the possibility of burn out.
The outside manifold surfaces are then coated with the
highest quality epoxy powder coating available, creating a part that
not only is highly corrosion resistant, but good looking as
well. Features an external fitting to accept stock MerCruiser
thermostat plumbing.
|
|
421-PFS-84SK Powerflow S-Pipe System - Small Block System Chevy with Stainless Risers
This "S" pipe is unique in many ways. It has
an infinite number of advantages. This pipe will
size up to many pre-existing port locations. It's great
for below platform applications with large camshafts
or high performance motors. It allows the exhaust
to mix with water down at the first connection.
Powerflow manifolds are manufactured using the
finest materials and most advanced techniques available.
The high quality aluminum manifold castings feature
water jackets that surround each exhaust passage, including
the port, to eliminate the possibility of burn out.
The outside manifold surfaces are then coated with the
highest quality epoxy powder coating available, creating a part that
not only is highly corrosion resistant, but good looking as
well. Features an external fitting to accept stock MerCruiser
thermostat plumbing.
|
|
421-PFS-82AK Powerflow Small Block Kit with Stainless Risers
Powerflow now offers a small block system. This
system is designed after the big block kit using the same
riser system. This system will increase your torque
and horsepower by 10%. This system is also available
fully polished, too.
Powerflow manifolds are manufactured using the
finest materials and most advanced techniques available.
The high quality aluminum manifold castings feature
water jackets that surround each exhaust passage, including
the port, to eliminate the possibility of burn out.
The outside manifold surfaces are then coated with the
highest quality epoxy powder coating available, creating a part that
not only is highly corrosion resistant, but good looking as
well. Features an external fitting to accept stock MerCruiser
thermostat plumbing.
|
|
421-02-8340 PowerFlow Small Block Manifold and "A" Riser Kit (Sold in pairs) To view and download the PDF line drawing Left Side CLICK HERE
To view and download the PDF line drawing Right Side CLICK HERE
To view and download the PDF water hose diagram CLICK HERE PowerFlow Small Block Manifold and "A" Riser Kit (Sold in pairs)
Shown with optional riser bung. These manifolds were designed for high horsepower 350 cid to 427 cid engines that are making 350 HP Plus. Manifolds have a 1 1/2" I.D. runner with a tall D port entry. The outlet is 3" with a stainless steel air straightened plate to direct exhaust into riser pipe for maximum scavenging. Manifolds will work with angled spark plugged heads or straight spark plugged heads. Also you can use tall valve covers for various rocker arm assemblies and stud girdle. Black manifolds are hard anodized prior to powder coat, to ensure against corrosion.
Weight savings of 65 lbs over cast iron and allows for twin installation down to 30" centers.
Small Block std. Stainless steel "A" risers are designed for stock Mercruiser Bravo exhaust tip locations. 3/4"npt fitting is used on front of pipe for thermostat housing that have (4) 1" hoses water to go to exhaust manifolds if needed click on (ADD BUNG). Shift bracket, ECM, or EFI brackets available as bolt on or welded to the risers. To order see PowerFlow accessories or click on "Related Products" on the right side of screen.
|
Kit Includes |
|
QTY |
Description |
P/N |
2 |
PowerFlow Small Block Manifolds (Black) |
02-1015 |
2 |
PowerFlow Small Block "A" Risers |
01-6019 |
2 |
Small Block Manifold Gaskets |
11-1009 |
2 |
PowerFlow Small Block Bolt Kits |
2-8081 |
|
|
421-02-8342 PowerFlow Small Block Manifold and "SA" Riser 3" Taller Kit (Sold in pairs) To view and download the PDF line drawing Left Side CLICK HERE ) To view and download the PDF line drawing Right Side CLICK HERE
To view and download the PDF water hose diagram CLICK HERE PowerFlow Small Block Manifold and "SA" Riser 3" Taller Kit (Sold in pairs)
Shown with optional riser bung. These manifolds were designed for high horsepower 350 cid to 427 cid engines that are making 350 HP Plus. Manifolds have a 1 1/2" I.D. runner with a tall D port entry. The outlet is 3" with a stainless steel air straightened plate to direct exhaust into riser pipe for maximum scavenging. Manifolds will work with angled spark plugged heads or straight spark plugged heads. Also you can use tall valve covers for various rocker arm assemblies and stud girdle. Black manifolds are hard anodized prior to powder coat, to ensure against corrosion.
Weight savings of 65 lbs over cast iron and allows for twin installation down to 30" centers.
Small Block 3" Stainless steel "A" risers are designed for stock location Mercruiser Bravo exhaust with 3" riser block between manifold & riser. Tip locations should be 3" higher then stock. 3/4"npt fitting is used on front of pipe for thermostat housing that have (4) 1" hoses water to go to exhaust manifolds if needed click on (ADD BUNG). Shift bracket, ECM, or EFI brackets available as bolt on or welded to the risers. To order see PowerFlow accessories or click on "Related Products" on the right side of screen..
|
Kit Includes |
|
QTY |
Description |
P/N |
2 |
PowerFlow Small Block Manifolds (Black) |
02-1015 |
2 |
PowerFlow Small Block "A" 3" Risers |
01-6020 |
2 |
Small Block Manifold Gaskets |
11-1009 |
2 |
PowerFlow Small Block Bolt Kits |
2-8081 |
|
|
421-02-8344 PowerFlow Small Block Manifold and "A" Riser Kit 6" Taller (Sold in pairs) To view and download the PDF line drawing Left Side CLICK HERE To view and download the PDF line drawing Right Side CLICK HERE To view and download the PDF water hose diagram CLICK HERE PowerFlow Small Block Manifold and "A" Riser Kit 6" Taller (Sold in pairs)
Shown with optional riser bung. These manifolds were designed for high horsepower 350 cid to 427 cid engines that are making 350 HP Plus. Manifolds have a 1 1/2" I.D. runner with a tall D port entry. The outlet is 3" with a stainless steel air straightened plate to direct exhaust into riser pipe for maximum scavenging. Manifolds will work with angled spark plugged heads or straight spark plugged heads. Also you can use tall valve covers for various rocker arm assemblies and stud girdle. Black manifolds are hard anodized prior to powder coat, to ensure against corrosion.
Weight savings of 65 lbs over cast iron and allows for twin installation down to 30" centers.
Small Block 6" Stainless steel "A" risers are designed for stock location Mercruiser Bravo exhaust with 6" riser block between manifold & riser. Tip locations should be 6" higher then stock. 3/4"npt fitting is used on front of pipe for thermostat housing that have (4) 1" hoses water to go to exhaust manifolds if needed click on (ADD BUNG). Shift bracket, ECM, or EFI brackets available as bolt on or welded to the risers. To order see PowerFlow accessories or click on "Related Products" on the right side of screen..
|
Kit Includes |
|
QTY |
Description |
P/N |
2 |
PowerFlow Small Block Manifolds (Polished) |
02-1016 |
2 |
PowerFlow Small Block "A" 6" Risers |
01-6021 |
2 |
Small Block Manifold Gaskets |
11-1009 |
2 |
PowerFlow Small Block Bolt Kits |
2-8081 |
|
|
421-02-8364 PowerFlow Small Block Manifold and "S" Riser Kit
To view and download the PDF line drawing Left Side CLICK HERE To view and download the PDF line drawing Right Side CLICK HERE To view and download the PDF water hose diagram CLICK HERE PowerFlow Small Block Manifold and "S" Riser Kit
Shown with optional riser bung. These manifolds were designed for high horsepower 350 cid to 427 cid engines that are making 350 HP Plus. Manifolds have a 1 1/2" I.D. runner with a tall D port entry. The outlet is 3" with a stainless steel air straightened plate to direct exhaust into riser pipe for maximum scavenging. Manifolds will work with angled spark plugged heads or straight spark plugged heads. Also you can use tall valve covers for various rocker arm assemblies and stud girdle. Black manifolds are hard anodized prior to powder coat, to ensure against corrosion.
Weight savings of 65 lbs over cast iron and allows for twin installation down to 30" centers.
SMALL BLOCK std. Stainless steel "S" pipe is unique in many ways. These pipes will fit many pre-existing port locations That are about crankshaft center line, and is widely used with swim step applications as well as V-Drives and Jet boats.the lower elbow is adjustable up & down with a 4" exhaust tip hose contention.
3/4"npt fitting is used on front of pipe for thermostat housing that have (4) 1" hoses water to go to exhaust manifolds if needed click on (ADD BUNG). Shift bracket, ECM, or EFI brackets available as bolt on or welded to the risers. To order see PowerFlow accessories or click on "Related Products" on the right side of screen.
|
Kit Includes |
|
QTY |
Description |
P/N |
2 |
PowerFlow Small Block Manifolds (Black) |
02-1015 |
2 |
PowerFlow Small Block "S" Risers |
01-6028 |
2 |
Small Block Manifold Gaskets |
11-1009 |
2 |
PowerFlow Small Block Bolt Kits |
2-8081 |
|
|
421-02-8352 PowerFlow Small Block Manifold and "SA" Riser Kit (Sold in pairs) To view and download the PDF line drawing Left Side CLICK HERETo view and download the PDF line drawing Right Side CLICK HERETo view and download the PDF water hose diagram CLICK HEREPowerFlow Small Block Manifold and "SA" Riser Kit (Sold in pairs)
Shown with optional riser bung. These manifolds were designed for high horsepower 350 cid to 427 cid engines that are making 350 HP Plus. Manifolds have a 1 1/2" I.D. runner with a tall D port entry. The outlet is 3" with a stainless steel air straightened plate to direct exhaust into riser pipe for maximum scavenging. Manifolds will work with angled spark plugged heads or straight spark plugged heads. Also you can use tall valve covers for various rocker arm assemblies and stud girdle. Black manifolds are hard anodized prior to powder coat, to ensure against corrosion.
Weight savings of 65 lbs over cast iron and allows for twin installation down to 30" centers.
Small Block std. Stainless steel "SA" riser pipes are designed for Mercruiser Silent Choice, Corsa Quick and Quiet (with modifications), and IMCO's Sound Advantage systems. They can also be used with our Aluminum "S" pipes part number 02-1225 for under swim step applications.
Shift bracket, ECM, or EFI brackets available as bolt on or welded to the risers. To order see PowerFlow accessories or click on "Related Products" on the right side of screen.
|
Kit Includes |
|
QTY |
Description |
P/N |
2 |
PowerFlow Small Block Manifolds (Black) |
02-1015 |
2 |
PowerFlow Small Block "SA" Risers |
01-6031 |
2 |
Small Block Manifold Gaskets |
11-1009 |
2 |
PowerFlow Small Block Bolt Kits |
2-8081 |
|
|
421-02-8354 PowerFlow Small Block Manifold and "SA" Riser 3" Taller Kit (Sold in pairs) To view and download the PDF line drawing Left Side CLICK HERETo view and download the PDF line drawing Right Side CLICK HERETo view and download the PDF water hose diagram CLICK HEREPowerFlow Small Block Manifold and "SA" Riser 3" Taller Kit
Shown with optional riser bung. These manifolds were designed for high horsepower 350 cid to 427 cid engines that are making 350 HP Plus. Manifolds have a 1 1/2" I.D. runner with a tall D port entry. The outlet is 3" with a stainless steel air straightened plate to direct exhaust into riser pipe for maximum scavenging. Manifolds will work with angled spark plugged heads or straight spark plugged heads. Also you can use tall valve covers for various rocker arm assemblies and stud girdle. Black manifolds are hard anodized prior to powder coat, to ensure against corrosion.
Weight savings of 65 lbs over cast iron and allows for twin installation down to 30" centers.
Small Block 3" Stainless steel "SA" riser pipes are designed to replace stock Mercruiser Bravo exhaust with 3" riser block between manifold & riser. 3/4"npt fitting is used on front of pipe for thermostat housing that have (4) 1" hoses water to go to exhaust manifolds if needed click on (ADD BUNG). Shift bracket, ECM, or EFI brackets available as bolt on or welded to the risers. To order see PowerFlow accessories. They can also be used with our Aluminum "S" pipes part number 02-1225 for under swim step applications.
Shift bracket, ECM, or EFI brackets available as bolt on or welded to the risers. To order see PowerFlow accessories or click on "Related Products" on the right side of screen.
|
Kit Includes |
|
QTY |
Description |
P/N |
2 |
PowerFlow Small Block Manifolds (Black) |
02-1015 |
2 |
PowerFlow Small Block "SA" 3" Risers |
01-6032 |
2 |
Small Block Manifold Gaskets |
11-1009 |
2 |
PowerFlow Small Block Bolt Kits |
2-8081 |
|
|
421-02-8356 PowerFlow Small Block Manifold and "SA" Riser 6" Taller Kit (Sold in pairs) To view and download the PDF line drawing Left Side CLICK HERETo view and download the PDF line drawing Right Side CLICK HERETo view and download the PDF water hose diagram CLICK HEREPowerFlow Small Block Manifold and "SA" Riser 6" Taller Kit
Shown with optional riser bung. These manifolds were designed for high horsepower 350 cid to 427 cid engines that are making 350 HP Plus. Manifolds have a 1 1/2" I.D. runner with a tall D port entry. The outlet is 3" with a stainless steel air straightened plate to direct exhaust into riser pipe for maximum scavenging. Manifolds will work with angled spark plugged heads or straight spark plugged heads. Also you can use tall valve covers for various rocker arm assemblies and stud girdle. Black manifolds are hard anodized prior to powder coat, to ensure against corrosion.
Weight savings of 65 lbs over cast iron and allows for twin installation down to 30" centers.
Small Block 6" Stainless steel "SA" riser pipes are designed to replace stock Mercruiser Bravo exhaust with 6" riser block between manifold & riser. 3/4"npt fitting is used on front of pipe for thermostat housing that have (4) 1" hoses water to go to exhaust manifolds if needed click on (ADD BUNG). Shift bracket, ECM, or EFI brackets available as bolt on or welded to the risers. To order see PowerFlow accessories. They can also be used with our Aluminum "S" pipes part number 02-1225 for under swim step applications.
Shift bracket, ECM, or EFI brackets available as bolt on or welded to the risers. To order see PowerFlow accessories or click on "Related Products" on the right side of screen.
|
Kit Includes |
|
QTY |
Description |
P/N |
2 |
PowerFlow Small Block Manifolds (Black) |
02-1015 |
2 |
PowerFlow Small Block "SA" 6" Risers |
01-6033 |
2 |
Small Block Manifold Gaskets |
11-1009 |
2 |
PowerFlow Small Block Bolt Kits |
2-8081 |
|
|
421-02-8049 PowerFlow Small Block Manifold Kit Black (Sold in pairs) PowerFlow Small Block Manifold Kit Black (Sold in pairs)
These manifolds were designed for big horsepower 350 cid to 427 cid engines that are making 350 HP Plus. Manifolds have a 1 1/2" I.D. runner with a tall D port entry. The outlet is 3" with a stainless steel air straightened plate to direct exhaust into riser for maximum scavenging. Manifolds will work with angled spark plugged heads or straight spark plugged heads. Also you can use tall valve covers for various rocker arm assemblies and stud girdle. Manifolds are available in black powder coated, hard anodized or polished in standard or recirc manifolds.
|
Kit Includes |
|
QTY |
Description |
P/N |
2 |
PowerFlow Small Block Manifolds (Black) |
02-1015 |
2 |
PowerFlow Small Block Bolt Kits |
02-8081 |
2 |
Small Block Manifold Gaskets |
11-1009 |
2 |
Small Block Manifold Riser Gaskets |
11-1002 |
|
|
421-02-8053 PowerFlow Small Block Manifold Kit Recirc Black (Sold in pairs) PowerFlow Small Block Manifold Kit Recirc Black (Sold in pairs)
These manifolds were designed for big horsepower 350 cid to 427 cid engines that are making 350 HP Plus. Manifolds have a 1 1/2" I.D. runner with a tall D port entry. The outlet is 3" with a stainless steel air straightened plate to direct exhaust into riser pipe for maximum scavenging. Manifolds will work with angled spark plugged heads or straight spark plugged heads. Also you can use tall valve covers for various rocker arm assemblies and stud girdle. Manifolds are available in black powder coated, hard anodized or polished in standard or recirc manifolds.
|
Kit Includes |
|
QTY |
Description |
P/N |
2 |
PowerFlow Small Block Recirc Manifolds (Black) |
02-1017 |
2 |
PowerFlow Small Block Bolt Kits |
02-8081 |
2 |
Small Block Manifold Gaskets |
11-1009 |
2 |
Small Block Manifold Riser Gaskets |
11-1002 |
|
|
421-02-1015 Black Small Block Manifolds Black Small Block Manifolds. (Sold in pairs)
These manifolds were designed for high horsepower 350 cid to 427 cid engines that are making 350 HP Plus. Manifolds have a 1 1⁄2" I.D. runner with a tall D port entry. The outlet is 3" with a stainless steel air straightened plate to direct exhaust into riser pipe for maximum scavenging.
Manifolds will work with angled spark plugged heads or straight spark plugged heads. Also you can use tall valve covers for various rocker arm assemblies and stud girdle. Manifolds are available in black powder coated, hard anodized or polished in standard or recirc manifolds.
The risers are highly polished stainless steel, and are designed for 4" exhaust tips. We offer a wide variety of riser pipe configurations (AS SHOWN IN RISER PIPE SECTION), to accommodate just about every application. Custom riser pipes can also be manufactured to order, just give us a call for details.
|
|
421-02-1017 Black Small Block Recirculation Manifolds. Black small block recirculation manifolds. (Sold in pairs)
These manifolds were designed for the water to recirculate or preheat (no water passes through riser pipe flange) high horsepower 350 cid to 427 cid engines that are making 350 HP Plus. Manifolds have a 1 1⁄2" I.D. Runner with a tall D port entry. The outlet is 3" with a stainless steel air straightened plate to direct exhaust into riser pipe for maximum scavenging.
Manifolds will work with angled spark plugged heads or straight spark plugged heads. Also you can use tall valve covers for various rocker arm assemblies and stud girdle. Manifolds are available in black powder coated, hard anodized.
The risers are highly polished stainless steel, and are designed for 4" exhaust tips. We offer a wide variety of riser pipe configurations (AS SHOWN IN RISER PIPE SECTION), to accommodate just about every application. Custom riser pipes can also be manufactured to order, just give us a call for details.
|
|
421-02-8346 PowerFlow Small Block Polished Manifold and "A" Riser Kit To view and download the PDF line drawing Left Side CLICK HERE
To view and download the PDF line drawing Right Side CLICK HERE To view and download the PDF water hose diagram CLICK HEREPowerFlow Small Block Polished Manifold and "A" Riser Kit
Shown with optional riser bung. These manifolds were designed for high horsepower 350 cid to 427 cid engines that are making 350 HP Plus. Manifolds have a 1 1/2" I.D. runner with a tall D port entry. The outlet is 3" with a stainless steel air straightened plate to direct exhaust into riser pipe for maximum scavenging. Manifolds will work with angled spark plugged heads or straight spark plugged heads. Also you can use tall valve covers for various rocker arm assemblies and stud girdle. Black manifolds are hard anodized prior to powder coat, to ensure against corrosion.
Weight savings of 65 lbs over cast iron and allows for twin installation down to 30" centers.
Small Block std. Stainless steel "A" risers are designed for stock Mercruiser Bravo exhaust tip locations. 3/4"npt fitting is used on front of pipe for thermostat housing that have (4) 1" hoses water to go to exhaust manifolds if needed click on (ADD BUNG). Shift bracket, ECM, or EFI brackets available as bolt on or welded to the risers. To order see PowerFlow accessories or click on "Related Products" on the right side of screen..
|
Kit Includes |
|
QTY |
Description |
P/N |
2 |
PowerFlow Small Block Manifolds (Polished) |
02-1016 |
2 |
PowerFlow Small Block "A" Risers |
01-6019 |
2 |
Small Block Manifold Gaskets |
11-1009 |
2 |
PowerFlow Small Block Bolt Kits |
2-8081 |
|
|
421-02-8348 PowerFlow Small Block Polished Manifold and "A" Riser 3" Taller Kit (Sold in pairs) To view and download the PDF line drawing Left Side CLICK HERE ) To view and download the PDF line drawing Right Side CLICK HERE
To view and download the PDF water hose diagram CLICK HERE PowerFlow Small Block Polished Manifold and "A" Riser 3" Taller Kit
Shown with optional riser bung. These manifolds were designed for high horsepower 350 cid to 427 cid engines that are making 350 HP Plus. Manifolds have a 1 1/2" I.D. runner with a tall D port entry. The outlet is 3" with a stainless steel air straightened plate to direct exhaust into riser pipe for maximum scavenging. Manifolds will work with angled spark plugged heads or straight spark plugged heads. Also you can use tall valve covers for various rocker arm assemblies and stud girdle. Black manifolds are hard anodized prior to powder coat, to ensure against corrosion.
Weight savings of 65 lbs over cast iron and allows for twin installation down to 30" centers.
Small Block 3" Stainless steel "A" risers are designed for stock location Mercruiser Bravo exhaust with 3" riser block between manifold & riser. Tip locations should be 3" higher then stock. 3/4"npt fitting is used on front of pipe for thermostat housing that have (4) 1" hoses water to go to exhaust manifolds if needed click on (ADD BUNG). Shift bracket, ECM, or EFI brackets available as bolt on or welded to the risers. To order see PowerFlow accessories or click on "Related Products" on the right side of screen..
|
Kit Includes |
|
QTY |
Description |
P/N |
2 |
PowerFlow Small Block Manifolds (Polished) |
02-1016 |
2 |
PowerFlow Small Block "A" 3" Risers |
01-6020 |
2 |
Small Block Manifold Gaskets |
11-1009 |
2 |
PowerFlow Small Block Bolt Kits |
2-8081 |
|
|
421-02-8350 PowerFlow Small Block Polished Manifold and "A" Riser 6" Taller Kit (Sold in pairs) To view and download the PDF line drawing Left Side CLICK HERETo view and download the PDF line drawing Right Side CLICK HERE To view and download the PDF water hose diagram CLICK HEREPowerFlow Small Block Polished Manifold and "A" Riser 6" Taller Kit
Shown with optional riser bung. These manifolds were designed for high horsepower 350 cid to 427 cid engines that are making 350 HP Plus. Manifolds have a 1 1/2" I.D. runner with a tall D port entry. The outlet is 3" with a stainless steel air straightened plate to direct exhaust into riser pipe for maximum scavenging. Manifolds will work with angled spark plugged heads or straight spark plugged heads. Also you can use tall valve covers for various rocker arm assemblies and stud girdle. Black manifolds are hard anodized prior to powder coat, to ensure against corrosion.
Weight savings of 65 lbs over cast iron and allows for twin installation down to 30" centers.
Small Block 6" Stainless steel "A" risers are designed for stock location Mercruiser Bravo exhaust with 6" riser block between manifold & riser. Tip locations should be 6" higher then stock. 3/4"npt fitting is used on front of pipe for thermostat housing that have (4) 1" hoses water to go to exhaust manifolds if needed click on (ADD BUNG). Shift bracket, ECM, or EFI brackets available as bolt on or welded to the risers. To order see PowerFlow accessories or click on "Related Products" on the right side of screen.
|
Kit Includes |
|
QTY |
Description |
P/N |
2 |
PowerFlow Small Block Manifolds (Polished) |
02-1016 |
2 |
PowerFlow Small Block "A" 6" Risers |
01-6021 |
2 |
Small Block Manifold Gaskets |
11-1009 |
2 |
PowerFlow Small Block Bolt Kits |
2-8081 |
|
|
421-02-8366 PowerFlow Small Block Polished Manifold and "S" Riser Kit To view and download the PDF line drawing Left Side CLICK HERETo view and download the PDF line drawing Right Side CLICK HERETo view and download the PDF water hose diagram CLICK HEREPowerFlow Small Block Polished Manifold and "S" Riser Kit
Shown with optional riser bung. These manifolds were designed for high horsepower 350 cid to 427 cid engines that are making 350 HP Plus. Manifolds have a 1 1/2" I.D. runner with a tall D port entry. The outlet is 3" with a stainless steel air straightened plate to direct exhaust into riser pipe for maximum scavenging. Manifolds will work with angled spark plugged heads or straight spark plugged heads. Also you can use tall valve covers for various rocker arm assemblies and stud girdle. Black manifolds are hard anodized prior to powder coat, to ensure against corrosion.
Weight savings of 65 lbs over cast iron and allows for twin installation down to 30" centers.
SMALL BLOCK std. Stainless steel "S" pipe is unique in many ways. These pipes will fit many pre-existing port locations That are about crankshaft center line, and is widely used with swim step applications as well as V-Drives and Jet boats.the lower elbow is adjustable up & down with a 4" exhaust tip hose contention.
3/4"npt fitting is used on front of pipe for thermostat housing that have (4) 1" hoses water to go to exhaust manifolds if needed click on (ADD BUNG).
Shift bracket, ECM, or EFI brackets available as bolt on or welded to the risers. To order see PowerFlow accessories or click on "Related Products" on the right side of screen.
.
|
Kit Includes |
|
QTY |
Description |
P/N |
2 |
PowerFlow Small Block Manifolds (Polished) |
02-1016 |
2 |
PowerFlow Small Block "S" Risers |
01-6028 |
2 |
Small Block Manifold Gaskets |
11-1009 |
2 |
PowerFlow Small Block Bolt Kits |
2-8081 |
|
|
421-02-8360 PowerFlow Small Block Polished Manifold and "SA" Riser 3" Taller Kit (Sold in pairs) To view and download the PDF line drawing Left Side CLICK HERETo view and download the PDF line drawing Right Side CLICK HERETo view and download the PDF water hose diagram CLICK HEREPowerFlow Small Block Polished Manifold and "SA" Riser 3" Taller Kit
Shown with optional riser bung. These manifolds were designed for high horsepower 350 cid to 427 cid engines that are making 350 HP Plus. Manifolds have a 1 1/2" I.D. runner with a tall D port entry. The outlet is 3" with a stainless steel air straightened plate to direct exhaust into riser pipe for maximum scavenging. Manifolds will work with angled spark plugged heads or straight spark plugged heads. Also you can use tall valve covers for various rocker arm assemblies and stud girdle.
Weight savings of 65 lbs over cast iron and allows for twin installation down to 30" centers.
Small Block 3" Stainless steel "SA" riser pipes are designed to replace stock Mercruiser Bravo exhaust with 3" riser block between manifold & riser. 3/4"npt fitting is used on front of pipe for thermostat housing that have (4) 1" hoses water to go to exhaust manifolds if needed click on (ADD BUNG). Shift bracket, ECM, or EFI brackets available as bolt on or welded to the risers. To order see PowerFlow accessories. They can also be used with our Aluminum "S" pipes part number 02-1225 for under swim step applications.
Shift bracket, ECM, or EFI brackets available as bolt on or welded to the risers. To order see PowerFlow accessories or click on "Related Products" on the right side of screen.
|
Kit Includes |
|
QTY |
Description |
P/N |
2 |
PowerFlow Small Block Manifolds (Polished) |
02-1016 |
2 |
PowerFlow Small Block "SA" 3" Risers |
01-6032 |
2 |
Small Block Manifold Gaskets |
11-1009 |
2 |
PowerFlow Small Block Bolt Kits |
2-8081 |
|
|
421-02-8362 PowerFlow Small Block Polished Manifold and "SA" Riser 6" Taller Kit (Sold in pairs) To view and download the PDF line drawing Left Side CLICK HERETo view and download the PDF line drawing Right Side CLICK HERETo view and download the PDF water hose diagram CLICK HEREPowerFlow Small Block Polished Manifold and "SA" Riser 6" Taller Kit
Shown with optional riser bung. These manifolds were designed for high horsepower 350 cid to 427 cid engines that are making 350 HP Plus. Manifolds have a 1 1/2" I.D. runner with a tall D port entry. The outlet is 3" with a stainless steel air straightened plate to direct exhaust into riser pipe for maximum scavenging. Manifolds will work with angled spark plugged heads or straight spark plugged heads. Also you can use tall valve covers for various rocker arm assemblies and stud girdle.
Weight savings of 65 lbs over cast iron and allows for twin installation down to 30" centers.
Small Block 6" Stainless steel "SA" riser pipes are designed to replace stock Mercruiser Bravo exhaust with 6" riser block between manifold & riser. 3/4"npt fitting is used on front of pipe for thermostat housing that have (4) 1" hoses water to go to exhaust manifolds if needed click on (ADD BUNG). Shift bracket, ECM, or EFI brackets available as bolt on or welded to the risers. To order see PowerFlow accessories. They can also be used with our Aluminum "S" pipes part number 02-1225 for under swim step applications.
Shift bracket, ECM, or EFI brackets available as bolt on or welded to the risers. To order see PowerFlow accessories or click on "Related Products" on the right side of screen.
|
Kit Includes |
|
QTY |
Description |
P/N |
2 |
PowerFlow Small Block Manifolds (Polished) |
02-1016 |
2 |
PowerFlow Small Block "SA" 6" Risers |
01-6033 |
2 |
Small Block Manifold Gaskets |
11-1009 |
2 |
PowerFlow Small Block Bolt Kits |
2-8081 |
|
|